Replacement Upgraded Relay
Updated Replacement Relay
Instructions Included
(May Not Be Actual Relay In Photo)
If your low fuel light is not working and the bulbs have been replaced, chances are the low…
All power for the window switches has to go through this relay. If none of your windows operate, check this relay for power going in and coming out. Depending on model and year, these are usually located under the hood or instrument…
This is a one-step replacement for the sequential components in the trunk. It replaces the sequential flasher, the sequential relay and the stop light relay. This single unit has plug connections which match the car's wiring harness.
…
3-speed Air Conditioning-Heater Resistors made from original factory specs and are a direct replacement for your old resistors. For vehicles with Air Conditioning.
…
The original electro-mechanical sequential relay is a roughly 3? square metal box with a black plastic lid to which about a dozen wires are attached. The new replacement unit has a matching plug that will plug right into the original…
The original electro-mechanical sequential relay is a roughly 3? square metal box with a black plastic lid to which about a dozen wires are attached. The new replacement unit has a matching plug that will plug right into the original…
Restoration Quality Parts This are the correct hardware to be sure your Thunderbird restoration is is tip top shape with the correct parts. (Even down to the screws. …
The all-in-one Sequential Pack replaces both the sequential relay and the sequential flasher. On early 67 Thunderbirds it also replaces the stop light relay. All the plugs match the plugs on the factory harness, so it just plugs in and is…
The original electro-mechanical sequential relay is a roughly 3? square metal box with a black plastic lid to which about a dozen wires are attached. The new replacement unit has a matching plug that will plug right into the original…
This is an electronic replacement for the turn signal sequential relay in the trunk. The rubber mounting pad in the trunk is home for 3 components: The sequential relay, the stop light relay, and the sequential flasher.…
The all-in-one Sequential Pack replaces both the sequential relay and the sequential flasher. On early 67's it also replaces the stop light relay. All the plugs match the plugs on the factory harness, so it just plugs in and is ready to go.…
The Black Box system was introduced during 1969 production and was used throughout 70 and 71. The Black Box is located in the trunk up on the ledge ahead of the spare tire and is fastened to the seat supports.…
The original electro-mechanical sequential relay is a roughly 3? square metal box with a black plastic lid to which about a dozen wires are attached. The new replacement unit has a matching plug that will plug right into the original…
This is a one-step replacement for the sequential components in the trunk. It replaces the sequential flasher, the sequential relay and the stop light relay. This single unit has plug connections which match the car's wiring harness.…