Our Economy series radiators are designed for car enthusiasts looking for an affordable cooling solution for their classic car that is nearly stock condition. Though some muscle cars or modified vehicles with a higher horsepower rating may require one of Champion Cooling’s three or four row radiators, these economy series radiators are built with two-row brazed aluminum cores that are tig-welded to aluminum tanks with approximately 14-16 louvered fins per inch, a brass petcock, and all are designed with aircraft grade aluminum. The tubes are 3/4” thick with a 1 1/2” core. In most cases this all aluminum design allows for stronger wider tubes that enable a two row aluminum radiator to outperform a three row copper brass of equal dimensions, while also being more affordable and lighter weight. We recommend this series for most applications with 500 horsepower or less.
Champion Cooling brought the Economy series of radiators to market with the goal of not only making a product our customers would be proud to show off, but also designed to the highest standard while still making it very affordable. You could easily spend between $450 and $950 on a comparable two-row radiator from one of our competitors.
When we sat down and thought about what our customer was actually purchasing, we discovered it wasn’t simply parts for a classic car. We discovered they were purchasing nostalgia because their classic car brought back great memories from their past. Knowing this, we made it our mission to make sure our products were manufactured with the highest level of quality so our customers would be proud to install them in their vehicles and show them off to their friends. We also set out to make sure we could provide our products at a very affordable price allowing more people to enjoy the nostalgia of restoring a classic car. In addition to making sure our products are of the highest standard we give our best effort to serve our customers and treat them exactly how we would want to be treated.
| Make | Model | Submodel | Years | Engine |
| Ford | Falcon | Base | 1964 | 4.7L / 289 / V8 3.3L / 200 / L6 |
| Ford | Falcon | Base | 1965 | 3.3L / 200 / L6 4.7L / 289 / V8 |
| Ford | Falcon | Futura Sprint | 1964 | 4.7L / 289 / V8 |
| Ford | Falcon | Futura Sprint | 1965 | 4.7L / 289 / V8 |
| Ford | Falcon | Futura | 1964 | 4.7L / 289 / V8 |
| Ford | Falcon | Futura | 1965 | 3.3L / 200 / L6 4.7L / 289 / V8 |
| Ford | Mustang | Base | 1964 | 4.7L / 289 / V8 |
| Ford | Mustang | Base | 1965 | 4.7L / 289 / V8 |
| Ford | Mustang | Base | 1966 | 4.7L / 289 / V8 |
| Ford | Mustang | Shelby GT-350H | 1966 | 4.7L / 289 / V8 |
| Ford | Mustang | Shelby GT-350 | 1965 | 4.7L / 289 / V8 |
| Ford | Mustang | Shelby GT-350 | 1966 | 4.7L / 289 / V8 |
| Ford | Ranchero | Base | 1965 | 4.7L / 289 / V8 |
| Mercury | Comet | Base | 1964 | 4.7L / 289 / V8 |
| Mercury | Comet | Base | 1965 | 4.7L / 289 / V8 |
| Core Height | 16.375 IN |
| Core Material | Aluminum |
| Core Row Quantity | 2 Row |
| Core Width | 17.25 IN |
| Down Flow Or Cross Flow Type | Down Flow |
| Filler Neck Attached | Yes |
| Inlet Diameter | 1.5 IN |
| Inlet Location | Passenger |
| Internal Transmission Oil Cooler | Yes |
| Mounting Type | Bracket |
| Outlet Diameter | 1.75 IN |
| Outlet Location | Passenger |
| Overall Height | 21.5 IN |
| Overall Width | 19.625 IN |
| Part Type | Radiator |
| Tank Material | Aluminum |
| Transmission Oil Cooler Fitting Type | 1/8-27NPT IN |
| Warranty | Limited Lifetime (Lifetime) |
